Firmware

  • SHIFT Red
  • Controller

SHIFT FIRMWARE

Download on desktop browser

Latest Ver. 1.2.1

IMPORTANT: The drone firmware v1.2.1 is compatible only with the controller firmware v1.1.0 or later. When updating the drone firmware, please update the controller firmware to v1.1.0 or later. If the controller is not updated, you may experience problems with takeoff. The firmware versions of the drone and controller can be found via the SHIFT application.

ABOUT THIS FIRMWARE

File info

  • File name: sfd1_fwup_image_v1.2.1.0.tsp
  • File size: 22MB
  • MD5: 3E5EF65E0DDA2902B452205BB18F679B
  • Benefits and improvements

  • (1.2.1) Fixed potential charging issues: Fixed problems that could potentially cause drones to malfunction during repeated battery charging.
  • (1.1.5) Added alert for dark environments: Alert pop-up will show when environment is too dark to take-off.
  • (1.1.5) Added adjustment controls for EV (Exposure Value): Adjusting the exposure value is now possible through the SHIFT application.
  • (1.1.4) (NEW!) Enhanced performance for Lezero mode: Increased accuracy for target tracking performance for Following, Horizontal Tracking, Yaw Tracking, and Hero modes.
  • (1.1.4) Added support for microSD cards larger than 32GB.
  • BEFORE YOU START

    1

    Please make sure there is only ONE firmware in the root directory.
    The format and file name of the firmware is 'sfd1_fwup_image_(version).tsp.'
    Do not change the file name and extensions of the firmware.

    2

    Download the drone firmware and save the firmware to the root directory of the Micro SD Card.

    3

    With the drone turned OFF,
    remove the battery and insert the Micro SD card into the Micro SD card slot.

    4

    After the battery is inserted and the drone is powered on,the firmware update will proceed automatically.
    While the firmware is updating, the front LED will flash, while the power LED remains off (The power LED MAY blink briefly during the update process).

    5

    Updating process will take around 2 minutes to complete.
    Do not remove the battery or turn off the drone while updating is in progress.

    6

    Once the firmware update is complete, the drone will automatically power off and all LEDs will turn off.
    After the update, the firmware file is automatically deleted from the Micro SD card.

    FOR MORE INFO

    FIRMWARE UPDATER

    Download on desktop browser

    Latest Ver. 1.0.4

    ABOUT THIS UPDATER

    File info

  • File name: SHIFT-Updater_v1.0.4.zip
  • File size: 5 MB
  • MD5: A3FCC68FC40144F34F862572249A1A59
  • CONTROLLER FIRMWARE

    Download on desktop browser

    Latest Ver. 1.2.6

    IMPORTANT: The controller firmware v1.2.6 is compatible only with the drone firmware v1.1.0 or later. When updating the controller firmware, please update the drone firmware to v1.1.0 or later. If the drone is not updated, you may experience problems with takeoff. The firmware versions of the drone and controller can be found via the SHIFT application.

    ABOUT THIS FIRMWARE

    File info

  • File name: SFD1C_UPDATE_v1.2.6.R0102CS07.tsp
  • File size: 315 KB
  • MD5: 74057D4B66319BDE324B6CFD5A56DF95
  • Benefits and improvements

  • (v1.2.6) Improved controller battery visualization on Shift Application.
  • (v1.2.5) Improves USB connection stability: Improves the unstable USB connection between PC and controller when updating firmware.
  • (v1.1.5) Fine-tuned audio and vibration alerts: audio and vibration alerts for different situations such as, low battery and weak signal has been tuned to be more noticeable.
  • (v1.1.2) (NEW!) Easier Mode Change : Now you can easily switch the modes between hovering and flight. Just place and hold your thumb into the center of the pad for 3 sec.
  • (v1.1.2) Improve controlling performance: Ring’s detection performance has been improved and ring does not get out of the detection range for controlling while flight.
  • BEFORE YOU START

    1

    Download and extract the SHIFT Updater and extracting the file will create the “SHIFT Updater” directory.

    2

    Download the controller firmware and save it to the “SHIFT Updater” directory.
  • SHIFT RED controller firmware has a .tsp file extension. Please note that changing the file extension will not proceed with the update.
  • 3

    Open the “SHIFT Updater” directory and run the “SHIFT Updater.exe.”
  • The first time the SHIFT Updater is launched, the controller’s driver may install. When the driver installation window appears, click “Yes” to install the driver. If the driver is not installed, the update cannot be commenced.
  • 4

    Connect the USB cable provided with the product to the USB port of the computer.
  • It is recommended to connect directly to the computer without going through a USB hub.
  • 5

    With the controller powered off, connect the USB cable to the controller while pressing and holding down on the Jog Button.
    Release the Jog Button as the cable is fully inserted to the controller’s port.

    6

    When the update is ready, “Ready to update” will appear on the screen and the “Update” button at the bottom will activate.
    Click on “Update” to begin the update process.(Ready to Update – Update button activated)
  • The update progress will be displayed on the screen during the update process. Do NOT remove the USB cable until the update is 100% complete.
  • 7

    When the update is complete, it will automatically change to charging mode. Click the “OK” button to exit the SHIFT Updater program.

    FOR MORE INFO